HS502FC Synthetic 75/Acrylic C-01/WG60 FSC

CODE:

HS502FC

Download

Synthetic 75/Acrylic C-01/WG60 FSC

USE:

Minimum labeling temp: -5℃.
Service temp: -20℃~80℃ (24h after labeling)
Suitable for daily chemical products label in conventional gloss.
Facestock is stiffer. Small caliber, irregular surface or extruded bottle is not recommended.

Made by Youhua. Sold in the US by Adwins International.

Detail

Application

Fulfill the requirement of ROHS, REACH, VOC

Minimum labeling temp: -5℃.

Service temp: -20℃~80℃ (24h after labeling)

Suitable for daily chemical products label in conventional gloss.

Facestock is stiffer. Small caliber, irregular surface or extruded bottle is not recommended.

Printing and processing

Excellent performance in printing and bar code print, good stiffness, easy to peel off. Suitable for conventional printing. Avoid to print to the edge of label, the high-contractility bring label crimp, cause the label detach from release paper or warp from label object. Ink test before printing is recommended.

Storage period and conditions

From date of manufacture: 12 months
Storage conditions: 23±2℃& relative humidity 50±5%
Prolonged storage outside these conditions might reduce the shelf life.

Facestock

Fine synthetic paper both have paper printability and BOPP film physical characteristics.

Indicator

Caliper

Opacity

Parameter

75±5%

≥80

Unit

μm

Method

ISO 534

TAPPI T-425

Adhesive

General purpose membrane emulsion acrylic adhesive
This adhesive complies with FDA section 21 (175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.

Indicator

Initial Tack

90° Peel Adhesion(20min)

Shear

Parameter

≥8

≥5

≥15

Unit

N/25mm

hours

Method

FTM9，ss

FTM2，ss

FTM8，ss

Liner

Super calendered white glassine

Indicator

Substance

Caliper

Parameter

56±5%

50±5

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Facestock: Fine synthetic paper both have paper printability and BOPP film physical characteristics.
Indicator	Parameter	Unit	Method
Caliper	75±5%	μm	ISO 534
Opacity	≥80	%	TAPPI T-425

Adhesive: General purpose membrane emulsion acrylic adhesive This adhesive complies with FDA section 21 (175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
Indicator	Parameter	Unit	Method
Initial Tack	≥8	N	FTM9，ss
90° Peel Adhesion(20min)	≥5	N/25mm	FTM2，ss
Shear	≥15	hours	FTM8，ss

Liner: Super calendered white glassine
Indicator	Parameter	Unit	Method
Substance	56±5%	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.