HS502FC Synthetic 75/Acrylic C-01/WG60 FSC

Código:

HS502FC

Descargar

Synthetic 75/Acrylic C-01/WG60 FSC

Uso:

Minimum labeling temp: -5℃.
Service temp: -20℃~80℃ (24h after labeling)
Suitable for daily chemical products label in conventional gloss.
Facestock is stiffer. Small caliber, irregular surface or extruded bottle is not recommended.

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of ROHS, REACH, VOC

Minimum labeling temp: -5℃.

Service temp: -20℃~80℃ (24h after labeling)

Suitable for daily chemical products label in conventional gloss.

Facestock is stiffer. Small caliber, irregular surface or extruded bottle is not recommended.

Impresión y procesamiento

Excellent performance in printing and bar code print, good stiffness, easy to peel off. Suitable for conventional printing. Avoid to print to the edge of label, the high-contractility bring label crimp, cause the label detach from release paper or warp from label object. Ink test before printing is recommended.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃& relative humidity 50±5%
Prolonged storage outside these conditions might reduce the shelf life.

Facestock

Fine synthetic paper both have paper printability and BOPP film physical characteristics.

Indicador

Caliper

Opacity

Parámetro

75±5%

≥80

Unidad

μm

Método

ISO 534

TAPPI T-425

Adhesive

General purpose membrane emulsion acrylic adhesive
This adhesive complies with FDA section 21 (175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.

Indicador

Initial Tack

90° Peel Adhesion(20min)

Shear

Parámetro

≥8

≥5

≥15

Unidad

N/25mm

hours

Método

FTM9，ss

FTM2，ss

FTM8，ss

Liner

Super calendered white glassine

Indicador

Substance

Caliper

Parámetro

56±5%

50±5

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Facestock: Fine synthetic paper both have paper printability and BOPP film physical characteristics.
Indicador	Parámetro	Unidad	Método
Caliper	75±5%	μm	ISO 534
Opacity	≥80	%	TAPPI T-425

Adhesive: General purpose membrane emulsion acrylic adhesive This adhesive complies with FDA section 21 (175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥8	N	FTM9，ss
90° Peel Adhesion(20min)	≥5	N/25mm	FTM2，ss
Shear	≥15	hours	FTM8，ss

Liner: Super calendered white glassine
Indicador	Parámetro	Unidad	Método
Substance	56±5%	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.