HPW872 BOPP White 60/Freezing Hot melt B-05/WG60

CODE:

HPW872

Download

BOPP White 60/Freezing Hot melt B-05/WG60

USE:

Minimum labeling temp: -25℃
Service temp: -50℃~50℃ (24h after labeling)
Suitable for application of daily chemical label & food label.
Facestock has special soft pearly gloss, and excellent process performance.
Must test to confirm if used in small bottle label (diameter smaller than 30mm).

Made by Youhua. Sold in the US by Adwins International.

Detail

Application

Fulfill the requirement of RoHS, REACH

Minimum labeling temp: -25℃

Service temp: -50℃~50℃ (24h after labeling)

Suitable for application of daily chemical label & food label.

Facestock has special soft pearly gloss, and excellent process performance.

Must test to confirm if used in small bottle label (diameter smaller than 30mm).

Printing and processing

Suitable for conventional printing.
Control the viscosity of print ink, high contractility bring label crimp, causing the label detach from release paper or warp from label object.
Lest the pattern fades, printed label without film should try to avoid contact with solvents such as alcohol, isopropanol, gasoline, toluene, etc.
Sharp special die-cut knife for film is recommended.
Pay attention to static electricity elimination during production to avoid its impact on product quality.
Not recommended to process die cutting in environment above 20 ℃ to avoid adhesive overflow. Please die cutting in low temperature environment.

Storage period and conditions

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock

A fine white BOPP film with special printability coating.

Indicator

Substance

Caliper

Glossiness

Parameter

43±5%

60±5%

≥85

Unit

g/㎡

μm

Method

ISO 536

ISO 534

ASTM D2457(60°)

Adhesive

Freezing hot melt adhesive
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.

Indicator

Initial Tack

90°Peel Adhesion (20min)

Shear

Low-temperature Loop Tack

Parameter

≥11

≥6

≥8

≥16

Unit

N/25mm

Method

FTM9,ss

FTM2,ss

FTM8,ss

FTM9,ss

Liner

Super calendered white glassine

Indicator

Substance

Caliper

Parameter

56±5%

50±5

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Facestock: A fine white BOPP film with special printability coating.
Indicator	Parameter	Unit	Method
Substance	43±5%	g/㎡	ISO 536
Caliper	60±5%	μm	ISO 534
Glossiness	≥85	%	ASTM D2457(60°)

Adhesive: Freezing hot melt adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
Indicator	Parameter	Unit	Method
Initial Tack	≥11	N	FTM9,ss
90°Peel Adhesion (20min)	≥6	N/25mm	FTM2,ss
Shear	≥8	H	FTM8,ss
Low-temperature Loop Tack	≥16	N	FTM9,ss

Liner: Super calendered white glassine
Indicator	Parameter	Unit	Method
Substance	56±5%	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.