HPW872 BOPP White 60/Freezing Hot melt B-05/WG60

Código:

HPW872

Descargar

BOPP White 60/Freezing Hot melt B-05/WG60

Uso:

Minimum labeling temp: -25℃
Service temp: -50℃~50℃ (24h after labeling)
Suitable for application of daily chemical label & food label.
Facestock has special soft pearly gloss, and excellent process performance.
Must test to confirm if used in small bottle label (diameter smaller than 30mm).

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of RoHS, REACH

Minimum labeling temp: -25℃

Service temp: -50℃~50℃ (24h after labeling)

Suitable for application of daily chemical label & food label.

Facestock has special soft pearly gloss, and excellent process performance.

Must test to confirm if used in small bottle label (diameter smaller than 30mm).

Impresión y procesamiento

Suitable for conventional printing.
Control the viscosity of print ink, high contractility bring label crimp, causing the label detach from release paper or warp from label object.
Lest the pattern fades, printed label without film should try to avoid contact with solvents such as alcohol, isopropanol, gasoline, toluene, etc.
Sharp special die-cut knife for film is recommended.
Pay attention to static electricity elimination during production to avoid its impact on product quality.
Not recommended to process die cutting in environment above 20 ℃ to avoid adhesive overflow. Please die cutting in low temperature environment.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock

A fine white BOPP film with special printability coating.

Indicador

Substance

Caliper

Glossiness

Parámetro

43±5%

60±5%

≥85

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

ASTM D2457(60°)

Adhesive

Freezing hot melt adhesive
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.

Indicador

Initial Tack

90°Peel Adhesion (20min)

Shear

Low-temperature Loop Tack

Parámetro

≥11

≥6

≥8

≥16

Unidad

N/25mm

Método

FTM9,ss

FTM2,ss

FTM8,ss

FTM9,ss

Liner

Super calendered white glassine

Indicador

Substance

Caliper

Parámetro

56±5%

50±5

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Facestock: A fine white BOPP film with special printability coating.
Indicador	Parámetro	Unidad	Método
Substance	43±5%	g/㎡	ISO 536
Caliper	60±5%	μm	ISO 534
Glossiness	≥85	%	ASTM D2457(60°)

Adhesive: Freezing hot melt adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥11	N	FTM9,ss
90°Peel Adhesion (20min)	≥6	N/25mm	FTM2,ss
Shear	≥8	H	FTM8,ss
Low-temperature Loop Tack	≥16	N	FTM9,ss

Liner: Super calendered white glassine
Indicador	Parámetro	Unidad	Método
Substance	56±5%	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.