Skip to content

Products

HPW587 BOPP White 38/Acrylic C-01/WG60
CODE:
HPW587
Download

BOPP White 38/Acrylic C-01/WG60

USE:

  • Minimum labeling temp: 0℃
  • Service temp: -20℃~80℃ (24h after labeling) Suitable for application of daily chemical label & food label.
  • Facestock has special soft pearly gloss, and excellent process performance.
  • Must test to confirm if used in small bottle label
  • (diameter smaller than 30mm).
Contact us now

Made by Youhua. Sold in the US by Adwins International.

Detail

Application


Fulfill the requirement of ROHS, REACH, VOC

Minimum labeling temp: 0℃

Service temp: -20℃~80℃ (24h after labeling) Suitable for application of daily chemical label & food label.

Facestock has special soft pearly gloss, and excellent process performance.

Must test to confirm if used in small bottle label

(diameter smaller than 30mm).

Printing and processing


Suitable for conventional printing.
Control the viscosity of print ink. High contractility will cause the label to curl, resulting in detachment from the liner or warping on the affixed object.
Lest the pattern fades, printed label without film should try to avoid contact with solvents such as alcohol, isopropanol, gasoline, toluene, etc.
Sharp special die-cut knife for film is recommended.

Storage period and conditions


From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%.
Prolonged storage outside these conditions might reduce the shelf life.

Facestock: A fine White BOPP film with special printability coated.
IndicatorParameterUnitMethod
Caliper38±5%μmISO 534
Adhesive: General purpose acrylic adhesive of film This adhesive complies with FDA section 21 (175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
IndicatorParameterUnitMethod
Initial Tack≥8NFTM9，ss
90°Peel Adhesion (20min)≥5N/25mmFTM2，ss
Shear≥15hoursFTM8，ss
Liner: Super calendered white glassine
IndicatorParameterUnitMethod
Substance56±5%g/㎡ISO 536
Caliper50±5μmISO 534

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.