Saltar al contenido

Productos

HPW587 BOPP White 38/Acrylic C-01/WG60
Código:
HPW587
Descargar

BOPP White 38/Acrylic C-01/WG60

Uso:

  • Minimum labeling temp: 0℃
  • Service temp: -20℃~80℃ (24h after labeling) Suitable for application of daily chemical label & food label.
  • Facestock has special soft pearly gloss, and excellent process performance.
  • Must test to confirm if used in small bottle label
  • (diameter smaller than 30mm).
Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación


Fulfill the requirement of ROHS, REACH, VOC

Minimum labeling temp: 0℃

Service temp: -20℃~80℃ (24h after labeling) Suitable for application of daily chemical label & food label.

Facestock has special soft pearly gloss, and excellent process performance.

Must test to confirm if used in small bottle label

(diameter smaller than 30mm).

Impresión y procesamiento


Suitable for conventional printing.
Control the viscosity of print ink. High contractility will cause the label to curl, resulting in detachment from the liner or warping on the affixed object.
Lest the pattern fades, printed label without film should try to avoid contact with solvents such as alcohol, isopropanol, gasoline, toluene, etc.
Sharp special die-cut knife for film is recommended.

Plazo y condiciones de almacenamiento


From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%.
Prolonged storage outside these conditions might reduce the shelf life.

Facestock: A fine White BOPP film with special printability coated.
IndicadorParámetroUnidadMétodo
Caliper38±5%μmISO 534
Adhesive: General purpose acrylic adhesive of film This adhesive complies with FDA section 21 (175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
IndicadorParámetroUnidadMétodo
Initial Tack≥8NFTM9,ss
90°Peel Adhesion (20min)≥5N/25mmFTM2,ss
Shear≥15hoursFTM8,ss
Liner: Super calendered white glassine
IndicadorParámetroUnidadMétodo
Substance56±5%g/㎡ISO 536
Caliper50±5μmISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.