HPW568C BOPP White 70/Acrylic C-03/PET30

CODE:

HPW568C

Download

BOPP White 70/Acrylic C-03/PET30

USE:

Minimum labeling temp: 5℃
Service temp: -20℃~70℃ (24h after labeling)
Suitable for application of daily chemical label & food label.
Must test to confirm if used in small bottle label (diameter smaller than 30mm).
Not recommended for bottles with irregular surfaces or extruded bottles. Foamed structural facestock for economical applications, such as label peeling and high-speed large-angle bending, may develop fine cracks. When testing the adhesion strength of inks or coatings with 3M 600/810 tapes, there is a risk of film rupture and delamination.

Made by Youhua. Sold in the US by Adwins International.

Detail

Application

Fulfill the requirement of RoHS, REACH, VOC

Minimum labeling temp: 5℃

Service temp: -20℃~70℃ (24h after labeling)

Suitable for application of daily chemical label & food label.

Must test to confirm if used in small bottle label (diameter smaller than 30mm).

Not recommended for bottles with irregular surfaces or extruded bottles. Foamed structural facestock for economical applications, such as label peeling and high-speed large-angle bending, may develop fine cracks. When testing the adhesion strength of inks or coatings with 3M 600/810 tapes, there is a risk of film rupture and delamination.

Printing and processing

Suitable for conventional printing.
Control the viscosity of print ink, high contractility bring label crimp, causing the label detach from release paper or warp from label object.
Lest the pattern fades, printed label without film should try to avoid contact with solvents such as alcohol, isopropanol, gasoline, toluene, etc.
Sharp special die-cut knife for film is recommended. The printed labels should avoid contact with high-concentration alcohol, isopropyl alcohol, benzene, and oxidizing liquids such as H2O2 as much as possible to prevent the separation of ink from the coating or substrate.

Storage period and conditions

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock

A high-quality white BOPP film with a special printability coating and pearlescent luster, featuring excellent processing performance.

Indicator

Substance

Caliper

Whiteness

Parameter

50±10%

70±10%

80±2

Unit

g/㎡

μm

Method

ISO 536

ISO 534

GB/T 2913

Adhesive

General purpose acrylic adhesive of film
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.

Indicator

Initial Tack

90°Peel Adhesion （20min）

Shear

Parameter

≥7.5

≥4.5

≥20

Unit

N/25mm

Method

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Transparent PET

Indicator

Caliper

Haze

Parameter

30±5%

≤2.7

Unit

μm

Method

ISO 534

GB2410-80

Facestock: A high-quality white BOPP film with a special printability coating and pearlescent luster, featuring excellent processing performance.
Indicator	Parameter	Unit	Method
Substance	50±10%	g/㎡	ISO 536
Caliper	70±10%	μm	ISO 534
Whiteness	80±2	%	GB/T 2913

Adhesive: General purpose acrylic adhesive of film This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.
Indicator	Parameter	Unit	Method
Initial Tack	≥7.5	N	FTM9,ss
90°Peel Adhesion （20min）	≥4.5	N/25mm	FTM2,ss
Shear	≥20	H	FTM8,ss

Liner: Transparent PET
Indicator	Parameter	Unit	Method
Caliper	30±5%	μm	ISO 534
Haze	≤2.7	%	GB2410-80

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.