HPS671 BOPP Silver 50/Hot melt B-02/WG60

CODE:

HPS671

Download

BOPP Silver 50/Hot melt B-02/WG60

USE:

Minimum labeling temp: 0℃
Service temp: -20℃~70℃ (24h after labeling)
Suitable for daily chemical products label, personal hygiene products label and promotional label.
Not recommended to be used in irregular curved surface and extra soft bottles because the facestock is stiff.
There is no barrier coating on the backside of the facestock, so there is a risk of swelling after combining with hot melt adhesive. It is recommended that labels be re-tested for application assessment after long-time storage.

Made by Youhua. Sold in the US by Adwins International.

Detail

Application

Fulfill the requirement of RoHS, REACH

Minimum labeling temp: 0℃

Service temp: -20℃~70℃ (24h after labeling)

Suitable for daily chemical products label, personal hygiene products label and promotional label.

Not recommended to be used in irregular curved surface and extra soft bottles because the facestock is stiff.

There is no barrier coating on the backside of the facestock, so there is a risk of swelling after combining with hot melt adhesive. It is recommended that labels be re-tested for application assessment after long-time storage.

Printing and processing

With special treatment coated, can be used in multiple printing methods such as letterpress, flexo, gravure, and screen printing etc. UV ink &water-based ink are suitable.
Control the viscosity of print ink, high-contractility bring label crimp, causing the label detach from release paper or warp from label object.
Excellent performance at bronzing.
Film special die-cutting knife is recommended,especially the flat die-cutting.

Storage period and conditions

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock

A kind of high metal gloss BOPP film with special printability coating.

Indicator

Substance

Caliper

Parameter

45±5%

50±5%

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Adhesive

General purpose permanent hot melt adhesive
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.

Indicator

Initial Tack

90°Peel Adhesion （20min）

Shear

Parameter

≥11

≥5

≥15

Unit

N/25mm

hours

Method

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Super calendered white glassine

Indicator

Substance

Caliper

Parameter

56±5%

50±5

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Facestock: A kind of high metal gloss BOPP film with special printability coating.
Indicator	Parameter	Unit	Method
Substance	45±5%	g/㎡	ISO 536
Caliper	50±5%	μm	ISO 534

Adhesive: General purpose permanent hot melt adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.
Indicator	Parameter	Unit	Method
Initial Tack	≥11	N	FTM9,ss
90°Peel Adhesion （20min）	≥5	N/25mm	FTM2,ss
Shear	≥15	hours	FTM8,ss

Liner: Super calendered white glassine
Indicator	Parameter	Unit	Method
Substance	56±5%	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.