HPS671 BOPP Silver 50/Hot melt B-02/WG60

Código:

HPS671

Descargar

BOPP Silver 50/Hot melt B-02/WG60

Uso:

Minimum labeling temp: 0℃
Service temp: -20℃~70℃ (24h after labeling)
Suitable for daily chemical products label, personal hygiene products label and promotional label.
Not recommended to be used in irregular curved surface and extra soft bottles because the facestock is stiff.
There is no barrier coating on the backside of the facestock, so there is a risk of swelling after combining with hot melt adhesive. It is recommended that labels be re-tested for application assessment after long-time storage.

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of RoHS, REACH

Minimum labeling temp: 0℃

Service temp: -20℃~70℃ (24h after labeling)

Suitable for daily chemical products label, personal hygiene products label and promotional label.

Not recommended to be used in irregular curved surface and extra soft bottles because the facestock is stiff.

There is no barrier coating on the backside of the facestock, so there is a risk of swelling after combining with hot melt adhesive. It is recommended that labels be re-tested for application assessment after long-time storage.

Impresión y procesamiento

With special treatment coated, can be used in multiple printing methods such as letterpress, flexo, gravure, and screen printing etc. UV ink &water-based ink are suitable.
Control the viscosity of print ink, high-contractility bring label crimp, causing the label detach from release paper or warp from label object.
Excellent performance at bronzing.
Film special die-cutting knife is recommended,especially the flat die-cutting.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock

A kind of high metal gloss BOPP film with special printability coating.

Indicador

Substance

Caliper

Parámetro

45±5%

50±5%

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Adhesive

General purpose permanent hot melt adhesive
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.

Indicador

Initial Tack

90°Peel Adhesion （20min）

Shear

Parámetro

≥11

≥5

≥15

Unidad

N/25mm

hours

Método

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Super calendered white glassine

Indicador

Substance

Caliper

Parámetro

56±5%

50±5

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Facestock: A kind of high metal gloss BOPP film with special printability coating.
Indicador	Parámetro	Unidad	Método
Substance	45±5%	g/㎡	ISO 536
Caliper	50±5%	μm	ISO 534

Adhesive: General purpose permanent hot melt adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥11	N	FTM9,ss
90°Peel Adhesion （20min）	≥5	N/25mm	FTM2,ss
Shear	≥15	hours	FTM8,ss

Liner: Super calendered white glassine
Indicador	Parámetro	Unidad	Método
Substance	56±5%	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.