YA055 Art Paper 80g /Acrylic A-01/WG60/Acrylic A-01/WG60

CODE:

YA055

Download

Art Paper 80g /Acrylic A-01/WG60/Acrylic A-01/WG60

USE:

Minimum labeling temp: +5℃
Service temp: -20℃~80℃ (24h after labeling)
Suitable for logistics labels, multifunctional labels, transit information labels, etc.
Not recommended for high-speed labeling or labeling of small-diameter, cambered, highly curved or rough surfaces.

Made by Youhua. Sold in the US by Adwins International.

Detail

Application

Fulfill the requirement of ROHS, REACH, VOC

Minimum labeling temp: +5℃

Service temp: -20℃~80℃ (24h after labeling)

Suitable for logistics labels, multifunctional labels, transit information labels, etc.

Not recommended for high-speed labeling or labeling of small-diameter, cambered, highly curved or rough surfaces.

Printing and processing

Suitable for conventional printing.
Full page printing is not recommended.

Storage period and conditions

From date of manufacture: 12 months
Storage conditions: 23±2℃& relative humidity 50±5%
Prolonged storage outside these conditions might reduce the shelf life.

Facestock

Art paper, glossiness between matte & high gloss.

Indicator

Substance

Caliper

Parameter

80±5%

70±5%

Unit

g/m²

μm

Method

ISO 536

ISO 534

Adhesive

High-viscosity permanent emulsion acrylic adhesive
This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products.

Indicator

Initial Tack

90°Peel Adhesion(20min)

Shear Strength

Parameter

≥14 or PT

≥7 or PT

≥3

Unit

N/25mm

hours

Method

FTM9, ss

FTM2, ss

FTM8, ss

Liner(both layers are the same material)

Super calendered white glassine

Indicator

Substance

Caliper

Parameter

56±5%

50±5

Unit

g/m²

μm

Method

ISO 536

ISO 534

Facestock: Art paper, glossiness between matte & high gloss.
Indicator	Parameter	Unit	Method
Substance	80±5%	g/m²	ISO 536
Caliper	70±5%	μm	ISO 534

Adhesive: High-viscosity permanent emulsion acrylic adhesive This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products.
Indicator	Parameter	Unit	Method
Initial Tack	≥14 or PT	N	FTM9, ss
90°Peel Adhesion(20min)	≥7 or PT	N/25mm	FTM2, ss
Shear Strength	≥3	hours	FTM8, ss

Liner(both layers are the same material): Super calendered white glassine
Indicator	Parameter	Unit	Method
Substance	56±5%	g/m²	ISO 536
Caliper	50±5	μm	ISO 534

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.