YA055 Art Paper 80g /Acrylic A-01/WG60/Acrylic A-01/WG60

Código:

YA055

Descargar

Art Paper 80g /Acrylic A-01/WG60/Acrylic A-01/WG60

Uso:

Minimum labeling temp: +5℃
Service temp: -20℃~80℃ (24h after labeling)
Suitable for logistics labels, multifunctional labels, transit information labels, etc.
Not recommended for high-speed labeling or labeling of small-diameter, cambered, highly curved or rough surfaces.

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of ROHS, REACH, VOC

Minimum labeling temp: +5℃

Service temp: -20℃~80℃ (24h after labeling)

Suitable for logistics labels, multifunctional labels, transit information labels, etc.

Not recommended for high-speed labeling or labeling of small-diameter, cambered, highly curved or rough surfaces.

Impresión y procesamiento

Suitable for conventional printing.
Full page printing is not recommended.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃& relative humidity 50±5%
Prolonged storage outside these conditions might reduce the shelf life.

Facestock

Art paper, glossiness between matte & high gloss.

Indicador

Substance

Caliper

Parámetro

80±5%

70±5%

Unidad

g/m²

μm

Método

ISO 536

ISO 534

Adhesive

High-viscosity permanent emulsion acrylic adhesive
This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products.

Indicador

Initial Tack

90°Peel Adhesion(20min)

Shear Strength

Parámetro

≥14 or PT

≥7 or PT

≥3

Unidad

N/25mm

hours

Método

FTM9, ss

FTM2, ss

FTM8, ss

Liner(both layers are the same material)

Super calendered white glassine

Indicador

Substance

Caliper

Parámetro

56±5%

50±5

Unidad

g/m²

μm

Método

ISO 536

ISO 534

Facestock: Art paper, glossiness between matte & high gloss.
Indicador	Parámetro	Unidad	Método
Substance	80±5%	g/m²	ISO 536
Caliper	70±5%	μm	ISO 534

Adhesive: High-viscosity permanent emulsion acrylic adhesive This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥14 or PT	N	FTM9, ss
90°Peel Adhesion(20min)	≥7 or PT	N/25mm	FTM2, ss
Shear Strength	≥3	hours	FTM8, ss

Liner(both layers are the same material): Super calendered white glassine
Indicador	Parámetro	Unidad	Método
Substance	56±5%	g/m²	ISO 536
Caliper	50±5	μm	ISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.