YA206FC Art Paper 80g FSC/Hot melt B-02/YG60 FSC

CODE:

YA206FC

Download

Art Paper 80g FSC/Hot melt B-02/YG60 FSC

USE:

Minimum labeling temp: -5℃
Service temp: -20℃~70℃ (24h after labeling)
Suitable for food labels, medicine labels in conventional gloss.
Must test to confirm if used in small bottles (diameter smaller than 30mm).

Made by Youhua. Sold in the US by Adwins International.

Detail

Application

Fulfill the requirement of ROHS, REACH

Minimum labeling temp: -5℃

Service temp: -20℃~70℃ (24h after labeling)

Suitable for food labels, medicine labels in conventional gloss.

Must test to confirm if used in small bottles (diameter smaller than 30mm).

Printing and processing

Suitable for conventional printing.
The facestock can be beautifully printed and colors of patterns are full.
For fine barcode printing, comprehensive print test is required.

Storage period and conditions

From date of manufacture: 12 months
Storage conditions: 23±2℃& relative humidity 50±5%
Prolonged storage outside these conditions might reduce the shelf life.

Facestock

FSC Art paper, glossiness between matte & high gloss

Indicator

Substance

Caliper

Parameter

80±5%

68±5

Unit

g/m²

μm

Method

ISO 536

ISO 534

Adhesive

General purpose permanent hot melt adhesive
This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products.

Indicator

Initial Tack

90°Peel Adhesion(20min)

Shear Strength

Parameter

≥17 or PT

≥9 or PT

≥10

Unit

N/25mm

hours

Method

FTM9, ss

FTM2, ss

FTM8, ss

Liner

Super calendered FSC yellow glassine

Indicator

Substance

Caliper

Parameter

56±5%

50±5

Unit

g/m²

μm

Method

ISO 536

ISO 534

Facestock: FSC Art paper, glossiness between matte & high gloss
Indicator	Parameter	Unit	Method
Substance	80±5%	g/m²	ISO 536
Caliper	68±5	μm	ISO 534

Adhesive: General purpose permanent hot melt adhesive This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products.
Indicator	Parameter	Unit	Method
Initial Tack	≥17 or PT	N	FTM9, ss
90°Peel Adhesion(20min)	≥9 or PT	N/25mm	FTM2, ss
Shear Strength	≥10	hours	FTM8, ss

Liner: Super calendered FSC yellow glassine
Indicator	Parameter	Unit	Method
Substance	56±5%	g/m²	ISO 536
Caliper	50±5	μm	ISO 534

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.