YA206FC Art Paper 80g FSC/Hot melt B-02/YG60 FSC

Código:

YA206FC

Descargar

Art Paper 80g FSC/Hot melt B-02/YG60 FSC

Uso:

Minimum labeling temp: -5℃
Service temp: -20℃~70℃ (24h after labeling)
Suitable for food labels, medicine labels in conventional gloss.
Must test to confirm if used in small bottles (diameter smaller than 30mm).

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of ROHS, REACH

Minimum labeling temp: -5℃

Service temp: -20℃~70℃ (24h after labeling)

Suitable for food labels, medicine labels in conventional gloss.

Must test to confirm if used in small bottles (diameter smaller than 30mm).

Impresión y procesamiento

Suitable for conventional printing.
The facestock can be beautifully printed and colors of patterns are full.
For fine barcode printing, comprehensive print test is required.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃& relative humidity 50±5%
Prolonged storage outside these conditions might reduce the shelf life.

Facestock

FSC Art paper, glossiness between matte & high gloss

Indicador

Substance

Caliper

Parámetro

80±5%

68±5

Unidad

g/m²

μm

Método

ISO 536

ISO 534

Adhesive

General purpose permanent hot melt adhesive
This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products.

Indicador

Initial Tack

90°Peel Adhesion(20min)

Shear Strength

Parámetro

≥17 or PT

≥9 or PT

≥10

Unidad

N/25mm

hours

Método

FTM9, ss

FTM2, ss

FTM8, ss

Liner

Super calendered FSC yellow glassine

Indicador

Substance

Caliper

Parámetro

56±5%

50±5

Unidad

g/m²

μm

Método

ISO 536

ISO 534

Facestock: FSC Art paper, glossiness between matte & high gloss
Indicador	Parámetro	Unidad	Método
Substance	80±5%	g/m²	ISO 536
Caliper	68±5	μm	ISO 534

Adhesive: General purpose permanent hot melt adhesive This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥17 or PT	N	FTM9, ss
90°Peel Adhesion(20min)	≥9 or PT	N/25mm	FTM2, ss
Shear Strength	≥10	hours	FTM8, ss

Liner: Super calendered FSC yellow glassine
Indicador	Parámetro	Unidad	Método
Substance	56±5%	g/m²	ISO 536
Caliper	50±5	μm	ISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.