YTT1039 Thermal Transfer Paper 70g/Acrylic A-01/YG60

CODE:

YTT1039

Download

Thermal Transfer Paper 70g/Acrylic A-01/YG60

USE:

Minimum labeling temp: +5℃
Service temp: -20℃~80℃ (24h after labeling)
Suitable for food label, blank carbon belt label in conventional glossy.
Can be used in small bottles with diameter less than 30mm. Sample testing before mass print is recommended.

Made by Youhua. Sold in the US by Adwins International.

Detail

Application

Fulfill the requirement of ROHS, REACH, VOC

Minimum labeling temp: +5℃

Service temp: -20℃~80℃ (24h after labeling)

Suitable for food label, blank carbon belt label in conventional glossy.

Can be used in small bottles with diameter less than 30mm. Sample testing before mass print is recommended.

Printing and processing

Suitable for conventional printing.
Full page printing is not recommended.
Conventional ribbon printing has excellent performance.

Storage period and conditions

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%.
Prolonged storage outside these conditions might reduce the shelf life.

Facestock

The thermal transfer paper has been super calendered, with smoothly surface.

Indicator

Substance

Caliper

Whiteness

Parameter

70±5%

73±5

≥80

Unit

g/㎡

μm

Method

ISO 536

ISO 534

ISO 2470

Adhesive

High viscosity permanent acrylic emulsion adhesive
This adhesive complies with FDA section 21 (175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.

Indicator

Initial Tack

90°Peel Adhesion (20min)

Shear

Parameter

≥14 or PT

≥7 or PT

≥3

Unit

N/25mm

hours

Method

FTM9，ss

FTM2，ss

FTM8，ss

Liner

Super calendered yellow glassine

Indicator

Substance

Caliper

Parameter

56±5%

50±5

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Facestock: The thermal transfer paper has been super calendered, with smoothly surface.
Indicator	Parameter	Unit	Method
Substance	70±5%	g/㎡	ISO 536
Caliper	73±5	μm	ISO 534
Whiteness	≥80	%	ISO 2470

Adhesive: High viscosity permanent acrylic emulsion adhesive This adhesive complies with FDA section 21 (175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
Indicator	Parameter	Unit	Method
Initial Tack	≥14 or PT	N	FTM9，ss
90°Peel Adhesion (20min)	≥7 or PT	N/25mm	FTM2，ss
Shear	≥3	hours	FTM8，ss

Liner: Super calendered yellow glassine
Indicator	Parameter	Unit	Method
Substance	56±5%	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.