YTT2004FC Thermal Transfer Paper 70g FSC/Hot melt B-02/WG60 FSC

CODE:

YTT2004FC

Download

Thermal Transfer Paper 70g FSC/Hot melt B-02/WG60 FSC

USE:

Minimum labeling temp: 0℃
Service temp: -20℃~70℃ (24h after labeling)
Suitable for food labels, blank ribbon labels in conventional gloss, etc.
Can be used on small bottles with diameter less than 30mm. Recommended to sample test before mass print.

Made by Youhua. Sold in the US by Adwins International.

Detail

Application

Fulfill the requirement of RoHS, REACH, FSC

Minimum labeling temp: 0℃

Service temp: -20℃~70℃ (24h after labeling)

Suitable for food labels, blank ribbon labels in conventional gloss, etc.

Can be used on small bottles with diameter less than 30mm. Recommended to sample test before mass print.

Printing and processing

Suitable for conventional printing.
Full page printing is not recommended.
Conventional ribbon printing has excellent performance. Must to test the applicability of the material and ribbon first.

Storage period and conditions

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%.
Prolonged storage outside these conditions might reduce the shelf life.

Facestock

The Facestock has been super calendered, with a smooth surface.

Indicator

Substance

Caliper

Whiteness

Parameter

70±6

73±5

≥80

Unit

g/㎡

μm

Method

ISO 536

ISO 534

ISO 2470

Adhesive

General purpose permanent hot melt adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.

Indicator

Initial Tack

90°Peel Adhesion （20min）

Shear

Parameter

≥17 or PT

≥9 or PT

≥10

Unit

N/25mm

hours

Method

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Super calendered white glassine

Indicator

Substance

Caliper

Parameter

56±5%

50±5

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Facestock: The Facestock has been super calendered, with a smooth surface.
Indicator	Parameter	Unit	Method
Substance	70±6	g/㎡	ISO 536
Caliper	73±5	μm	ISO 534
Whiteness	≥80	%	ISO 2470

Adhesive: General purpose permanent hot melt adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.
Indicator	Parameter	Unit	Method
Initial Tack	≥17 or PT	N	FTM9,ss
90°Peel Adhesion （20min）	≥9 or PT	N/25mm	FTM2,ss
Shear	≥10	hours	FTM8,ss

Liner: Super calendered white glassine
Indicator	Parameter	Unit	Method
Substance	56±5%	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.