HTS825 Thermal Synthetic 75/Removable Acrylic A-03/WG60

CODE:

HTS825

Download

Thermal Synthetic 75/Removable Acrylic A-03/WG60

USE:

Minimum labeling temp: 5℃
Service temp: -20℃~70℃ (24h after labeling)
Suitable for transit labels, logistics labels,etc.
Application environment above 50℃ or direct sunlight are not applicable.
Due to variations in substrates and usage environments, adhesive properties may change over time—viscosity may increase (potentially becoming permanent) or decrease. Some substrates may react with removable adhesives. Full testing is recommended before use.

Made by Youhua. Sold in the US by Adwins International.

Detail

Application

Fulfill the requirement of RoHS, REACH, VOC

Minimum labeling temp: 5℃

Service temp: -20℃~70℃ (24h after labeling)

Suitable for transit labels, logistics labels,etc.

Application environment above 50℃ or direct sunlight are not applicable.

Due to variations in substrates and usage environments, adhesive properties may change over time—viscosity may increase (potentially becoming permanent) or decrease. Some substrates may react with removable adhesives. Full testing is recommended before use.

Printing and processing

Suitable for conventional printing.
Alcohol or volatile organic solvent inks are not applicable.
Due to the thermal sensitivity of the product, should be avoided processing in environments over 50°C.

Storage period and conditions

From date of manufacture: 6 months
Storage conditions: 23±2℃ & relative humidity 50±5%. According to the thermal paper properties, please try to avoid keeping the product in high temperature, high humidity, alcohol, oil, plasticizer, etc.

Facestock

Film-based thermosensitive material with resistance of water and oil. And it also has a certain resistance to alcohol, tearing and rubbing.

Indicator

Caliper

Optical

Parameter

75±5%

≥1.2

Unit

μm

Method

ISO 534

GB/T 28210

Adhesive

Removable acrylic adhesive
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.

Indicator

Initial Tack

90°Peel Adhesion （20min）

Shear

Parameter

2-7

1-3.5

≥1

Unit

N/25mm

hours

Method

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Super calendered white glassine

Indicator

Substance

Caliper

Parameter

56±5%

50±5

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Facestock: Film-based thermosensitive material with resistance of water and oil. And it also has a certain resistance to alcohol, tearing and rubbing.
Indicator	Parameter	Unit	Method
Caliper	75±5%	μm	ISO 534
Optical	≥1.2		GB/T 28210

Adhesive: Removable acrylic adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.
Indicator	Parameter	Unit	Method
Initial Tack	2-7	N	FTM9,ss
90°Peel Adhesion （20min）	1-3.5	N/25mm	FTM2,ss
Shear	≥1	hours	FTM8,ss

Liner: Super calendered white glassine
Indicator	Parameter	Unit	Method
Substance	56±5%	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.