YA2021BF Art Paper 80g FSC/ Bio-based Hot melt/WG60

CODE:

YA2021BF

Download

Art Paper 80g FSC/ Bio-based Hot melt/WG60

USE:

Minimum labeling temp: 10℃
Service temp: 5℃~70℃ (24h after labeling)
Suitable for food or medicine label in conventional gloss.
Must test to confirm if used in small bottle label (diameter smaller than 30mm).
The adhesive raw materials consist of over 70% bio-based content, embodying low-carbon and eco-friendly principles to support sustainable development.

Made by Youhua. Sold in the US by Adwins International.

Detail

Application

Fulfill the requirement of RoHS, REACH, AGEC(MOAH/MOSH)

Minimum labeling temp: 10℃

Service temp: 5℃~70℃ (24h after labeling)

Suitable for food or medicine label in conventional gloss.

Must test to confirm if used in small bottle label (diameter smaller than 30mm).

The adhesive raw materials consist of over 70% bio-based content, embodying low-carbon and eco-friendly principles to support sustainable development.

Printing and processing

Suitable for conventional printing.
Full page printing is not recommended.

Storage period and conditions

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock

FSC Art paper, glossiness between matte & high gloss.

Indicator

Substance

Caliper

Parameter

80±5%

68±5

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Adhesive

A hot-melt adhesive with a high proportion of bio-based content
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.

Indicator

Initial Tack

90°Peel Adhesion （20min）

Shear

Parameter

≥14 or PT

≥7 or PT

≥10

Unit

N/25mm

hours

Method

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Super calendered white glassine

Indicator

Substance

Caliper

Parameter

56±5%

50±5

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Facestock: FSC Art paper, glossiness between matte & high gloss.
Indicator	Parameter	Unit	Method
Substance	80±5%	g/㎡	ISO 536
Caliper	68±5	μm	ISO 534

Adhesive: A hot-melt adhesive with a high proportion of bio-based content This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.
Indicator	Parameter	Unit	Method
Initial Tack	≥14 or PT	N	FTM9,ss
90°Peel Adhesion （20min）	≥7 or PT	N/25mm	FTM2,ss
Shear	≥10	hours	FTM8,ss

Liner: Super calendered white glassine
Indicator	Parameter	Unit	Method
Substance	56±5%	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.