Skip to content

Products

HPW561U UV inkjet Bopp White 60/Acrylic C-01/WG60
CODE:
HPW561U
Download

UV inkjet Bopp White 60/Acrylic C-01/WG60

USE:

  • Minimum labeling temp: -5℃
  • Service temp: -20℃~80℃ (24h after labeling)
  • Suitable for daily chemical labels with regular gloss.
  • Due to the stiffer facestock, this material is not recommended for bottles with small diameter or labeling to irregular surfaces or often extruded bottles.
Contact us now

Made by Youhua. Sold in the US by Adwins International.

Detail

Application


Fulfill the requirement of RoHS, REACH, VOC

Minimum labeling temp: -5℃

Service temp: -20℃~80℃ (24h after labeling)

Suitable for daily chemical labels with regular gloss.

Due to the stiffer facestock, this material is not recommended for bottles with small diameter or labeling to irregular surfaces or often extruded bottles.

Printing and processing


Suitable for conventional printing.It should be avoided to print to the edge of the label, high contractility will cause the label to curl, resulting in detachment from the liner or warping on the affixed object. It is recommended to conduct ink tests before printing.
It can be used in digital UV printing process.
Special die-cut knife for film is recommended.
Pay attention to static electricity elimination during production to avoid its impact on product quality.

Storage period and conditions


From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock: A fine white BOPP film with special printability coating.
IndicatorParameterUnitMethod
Substance43±5%g/㎡ISO 536
Caliper60±5%μmISO 534
Adhesive: General purpose acrylic adhesive of film This adhesive complies with FDA section 21 (175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
IndicatorParameterUnitMethod
Initial Tack≥8NFTM9，ss
90°Peel Adhesion (20min)≥5N/25mmFTM2，ss
Shear≥15hoursFTM8，ss
Liner: Super calendered white glassine
IndicatorParameterUnitMethod
Substance56±5%g/㎡ISO 536
Caliper50±5μmISO 534

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.