Products
DownloadBOPP Silver 50/Acrylic C-01/WG60
USE:
Minimum labeling temp: 0℃- Service temp: -20℃~80℃ (24h after labeling)
- Suitable for daily chemical products label, personal hygiene products label and promotional label.
- Not recommended to be used in irregular curved surface and extra soft bottle because the facestock is stiffer.
- Not recommended for occasions with duplicate paste requirement.
Contact us nowMade by Youhua. Sold in the US by Adwins International.
Detail
Application
Fulfill the requirement of RoHS, REACH, VOC
Minimum labeling temp: 0℃
Service temp: -20℃~80℃ (24h after labeling)
Suitable for daily chemical products label, personal hygiene products label and promotional label.
Not recommended to be used in irregular curved surface and extra soft bottle because the facestock is stiffer.
Not recommended for occasions with duplicate paste requirement.
Printing and processing
With special treatment coating, can be used in letterpress printing, flexo printing, gravure printing, screen printing and varieties of printing methods. Suitable for UV ink.
Control the viscosity of print ink. High contractility brings label crimp, causing the label detach from release paper or warp from label object.
Excellent performance at bronzing.
It is recommended to use a sharp film-specific die-cutting knife, especially for flat pressing die-cutting.
Pay attention to static electricity elimination during production to avoid its impact on product quality.
Storage period and conditions
From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.
| Indicator | Parameter | Unit | Method |
|---|---|---|---|
| Substance | 45±3 | g/㎡ | ISO 536 |
| Caliper | 50±5 | μm | ISO 534 |
| Indicator | Parameter | Unit | Method |
|---|---|---|---|
| Initial Tack | ≥8 | N | FTM9,ss |
| 90°Peel Adhesion （20min） | ≥5 | N/25mm | FTM2,ss |
| Shear | ≥15 | hours | FTM8,ss |
| Indicator | Parameter | Unit | Method |
|---|---|---|---|
| Substance | 56±5% | g/㎡ | ISO 536 |
| Caliper | 50±5 | μm | ISO 534 |
Statement
All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.