CODE:

YA221

Download

Art Paper 80g /Hot melt B-02/YG50

USE:

Minimum labeling temp: 0℃
Service temp: -20℃~70℃ (24h after labeling)
Suitable for barcode printing on conventional gloss surfaces and applications requiring fine printing in sectors such as food, retail, and pharmaceuticals.
Must test to confirm if used on small bottle labels (diameter smaller than 30mm).
Rough surface substrates are not recommended.

Made by Youhua. Sold in the US by Adwins International.

Detail

Application

Fulfill the requirement of RoHS, REACH

Minimum labeling temp: 0℃

Service temp: -20℃~70℃ (24h after labeling)

Suitable for barcode printing on conventional gloss surfaces and applications requiring fine printing in sectors such as food, retail, and pharmaceuticals.

Must test to confirm if used on small bottle labels (diameter smaller than 30mm).

Rough surface substrates are not recommended.

Printing and processing

Suitable for conventional printing.
Control the viscosity of ink to avoid coating detachment caused by heavy-viscosity ink.
For fine barcode printing, comprehensive print test is required.

Storage period and conditions

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock

Art paper, glossiness between matte & high gloss.

Indicator

Substance

Caliper

Parameter

80±5%

70±5%

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Adhesive

General purpose permanent hot melt adhesives
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.

Indicator

Initial Tack

90°Peel Adhesion （20min）

Shear

Parameter

≥17 or PT

≥9 or PT

≥10

Unit

N/25mm

hours

Method

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Super calendered yellow glassine

Indicator

Substance

Caliper

Parameter

50±5%

43±5%

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Facestock: Art paper, glossiness between matte & high gloss.
Indicator	Parameter	Unit	Method
Substance	80±5%	g/㎡	ISO 536
Caliper	70±5%	μm	ISO 534

Adhesive: General purpose permanent hot melt adhesives This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
Indicator	Parameter	Unit	Method
Initial Tack	≥17 or PT	N	FTM9,ss
90°Peel Adhesion （20min）	≥9 or PT	N/25mm	FTM2,ss
Shear	≥10	hours	FTM8,ss

Liner: Super calendered yellow glassine
Indicator	Parameter	Unit	Method
Substance	50±5%	g/㎡	ISO 536
Caliper	43±5%	μm	ISO 534

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.