YA2007 High-Gloss Art Paper 80g /Hot melt B-02/YPEK80

CODE:

YA2007

Download

High-Gloss Art Paper 80g /Hot melt B-02/YPEK80

USE:

Minimum labeling temp: 0℃
Service temp: -20℃~65℃ (24h after labeling)
Suitable for food or medicine label in high gloss.
Not recommended in rough surface substrates, not recommended for small bore bottles or highly curved surface labeling.

Made by Youhua. Sold in the US by Adwins International.

Detail

Application

Fulfill the requirement of RoHS, REACH

Minimum labeling temp: 0℃

Service temp: -20℃~65℃ (24h after labeling)

Suitable for food or medicine label in high gloss.

Not recommended in rough surface substrates, not recommended for small bore bottles or highly curved surface labeling.

Printing and processing

Suitable for conventional printing.
Control the viscosity of print ink, to avoid heavy viscosity cause coating exfoliation.

Storage period and conditions

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life. Products beyond the expiration date still can be used after passing the inspection.

Facestock

A kind of high gloss art paper with polishing coating. The surface exhibits high whiteness.

Indicator

Substance

Caliper

Parameter

85±5%

88±5%

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Adhesive

General purpose permanent hot melt adhesive
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.

Indicator

Initial Tack

90°Peel Adhesion (20min)

Shear

Parameter

≥17 or PT

≥9 or PT

≥10

Unit

N/25mm

Method

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Yellow PEK

Indicator

Substance

Caliper

Parameter

80±10%

100±10%

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Facestock: A kind of high gloss art paper with polishing coating. The surface exhibits high whiteness.
Indicator	Parameter	Unit	Method
Substance	85±5%	g/㎡	ISO 536
Caliper	88±5%	μm	ISO 534

Adhesive: General purpose permanent hot melt adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
Indicator	Parameter	Unit	Method
Initial Tack	≥17 or PT	N	FTM9,ss
90°Peel Adhesion (20min)	≥9 or PT	N/25mm	FTM2,ss
Shear	≥10	H	FTM8,ss

Liner: Yellow PEK
Indicator	Parameter	Unit	Method
Substance	80±10%	g/㎡	ISO 536
Caliper	100±10%	μm	ISO 534

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.