YA251TF Art Paper 120g FSC/Hot melt B-02/WG60

CODE:

YA251TF

Download

Art Paper 120g FSC/Hot melt B-02/WG60

USE:

Minimum labeling temp: 0℃
Service temp: -20℃~70℃ (24h after labeling)
Suitable for single pages, folding pages, booklets, posters, etc.
It is not recommended to use labels on small bottles with a diameter of less than 30mm.

Made by Youhua. Sold in the US by Adwins International.

Detail

Application

Fulfill the requirement of RoHS, REACH

Minimum labeling temp: 0℃

Service temp: -20℃~70℃ (24h after labeling)

Suitable for single pages, folding pages, booklets, posters, etc.

It is not recommended to use labels on small bottles with a diameter of less than 30mm.

Printing and processing

Suitable for conventional printing.
Control the viscosity of print ink, to avoid heavy viscosity cause coating exfoliation.
The facestock is suitable for high-quality printing and hot stamping. During sampling, pay attention to whether its release properties are adequate for the application.

Storage period and conditions

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock

FSC Art paper, glossiness between matte & high gloss.

Indicator

Substance

Caliper

Parameter

120±5%

120±10%

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Adhesive

General purpose permanent hot melt adhesive
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.

Indicator

Initial Tack

90°Peel Adhesion (20min)

Shear

Parameter

≥17 or PT

≥8 or PT

≥10

Unit

N/25mm

Method

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Super calendered white glassine

Indicator

Substance

Caliper

Parameter

56±5%

50±5

Unit

g/㎡

μm

Method

ISO 536

ISO 534

Facestock: FSC Art paper, glossiness between matte & high gloss.
Indicator	Parameter	Unit	Method
Substance	120±5%	g/㎡	ISO 536
Caliper	120±10%	μm	ISO 534

Adhesive: General purpose permanent hot melt adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.
Indicator	Parameter	Unit	Method
Initial Tack	≥17 or PT	N	FTM9,ss
90°Peel Adhesion (20min)	≥8 or PT	N/25mm	FTM2,ss
Shear	≥10	H	FTM8,ss

Liner: Super calendered white glassine
Indicator	Parameter	Unit	Method
Substance	56±5%	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Statement

All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.We reserve the rights of final explanation.