YTT1034FC Thermal Transfer Paper 70g FSC/Acrylic A-01/WG60 FSC

Código:

YTT1034FC

Descargar

Thermal Transfer Paper 70g FSC/Acrylic A-01/WG60 FSC

Uso:

Minimum labeling temp: 5℃
Service temp: -20℃~80℃ (24h after labeling)
Suitable for food labels, blank ribbon labels in conventional gloss, etc.
Can be used on small bottles with diameter less than 30mm. Recommended to sample test before mass print.

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of RoHS, REACH, VOC, FSC

Minimum labeling temp: 5℃

Service temp: -20℃~80℃ (24h after labeling)

Suitable for food labels, blank ribbon labels in conventional gloss, etc.

Can be used on small bottles with diameter less than 30mm. Recommended to sample test before mass print.

Impresión y procesamiento

Suitable for conventional printing.
Full page printing is not recommended.
Conventional ribbon printing has excellent performance.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%.
Prolonged storage outside these conditions might reduce the shelf life.

Facestock

The Facestock has been super calendered, with a smooth surface.

Indicador

Substance

Caliper

Whiteness

Parámetro

70±6

73±5

≥80

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

ISO 2470

Adhesive

High viscosity permanent acrylic emulsion adhesive
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.

Indicador

Initial Tack

90°Peel Adhesion （20min）

Shear

Parámetro

≥14 or PT

≥7 or PT

≥3

Unidad

N/25mm

hours

Método

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Super calendered white glassine

Indicador

Substance

Caliper

Parámetro

56±5%

50±5

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Facestock: The Facestock has been super calendered, with a smooth surface.
Indicador	Parámetro	Unidad	Método
Substance	70±6	g/㎡	ISO 536
Caliper	73±5	μm	ISO 534
Whiteness	≥80	%	ISO 2470

Adhesive: High viscosity permanent acrylic emulsion adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥14 or PT	N	FTM9,ss
90°Peel Adhesion （20min）	≥7 or PT	N/25mm	FTM2,ss
Shear	≥3	hours	FTM8,ss

Liner: Super calendered white glassine
Indicador	Parámetro	Unidad	Método
Substance	56±5%	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.