HTS826 Thermal Synthetic 54/Removable Acrylic A-03/WG60

Código:

HTS826

Descargar

Thermal Synthetic 54/Removable Acrylic A-03/WG60

Uso:

Minimum labeling temp: 5℃
Service temp: -20℃~70℃ (24h after labeling)
Suitable for transit labels, logistics labels,etc.
Application environment above 50℃ or direct sunlight are not applicable.
Due to the differences of labeling substrate and the application environment, after labeling (usually 3 months), the adhesive viscosity may increase and there is a possibility of transitioning to permanent adhesive; or the adhesive viscosity may decrease. Some substrates may have strong chemical reaction with removable adhesive, so full testing is recommended before use.

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of RoHS, REACH，VOC

Minimum labeling temp: 5℃

Service temp: -20℃~70℃ (24h after labeling)

Suitable for transit labels, logistics labels,etc.

Application environment above 50℃ or direct sunlight are not applicable.

Due to the differences of labeling substrate and the application environment, after labeling (usually 3 months), the adhesive viscosity may increase and there is a possibility of transitioning to permanent adhesive; or the adhesive viscosity may decrease. Some substrates may have strong chemical reaction with removable adhesive, so full testing is recommended before use.

Impresión y procesamiento

Suitable for conventional printing.
Alcohol or volatile organic solvent inks are not applicable.
Due to the thermal sensitivity of the product, should be avoided processing in environments over 50°C.

Plazo y condiciones de almacenamiento

From date of manufacture: 6 months
Storage conditions: 23±2℃ & relative humidity 50±5%. According to the thermal paper properties, please try to avoid keeping the product in high temperature, high humidity, alcohol, oil, plasticizer, etc.

Facestock

Film-based thermosensitive material with resistance of water and oil. This product has resistance to tear and abrasion.

Indicador

Substance

Caliper

Optical

Parámetro

41±5

54±5%

≥1.1

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

GB/T 28210

Adhesive

Removable acrylic adhesive
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.

Indicador

Initial Tack

90°Peel Adhesion （20min）

Shear

Parámetro

2-8

1-3.5

≥1

Unidad

N/25mm

hours

Método

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Super calendered white glassine

Indicador

Substance

Caliper

Parámetro

56±5%

50±5

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Facestock: Film-based thermosensitive material with resistance of water and oil. This product has resistance to tear and abrasion.
Indicador	Parámetro	Unidad	Método
Substance	41±5	g/㎡	ISO 536
Caliper	54±5%	μm	ISO 534
Optical	≥1.1		GB/T 28210

Adhesive: Removable acrylic adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	2-8	N	FTM9,ss
90°Peel Adhesion （20min）	1-3.5	N/25mm	FTM2,ss
Shear	≥1	hours	FTM8,ss

Liner: Super calendered white glassine
Indicador	Parámetro	Unidad	Método
Substance	56±5%	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.