Código:

HS512

Descargar

Synthetic 75/Acrylic C-01/WG80

Uso:

Minimum labeling temp: 0℃
Service temp: -20℃~80℃ (24h after labeling)
Suitable for aviation or railway baggage tags, high quality logistics tags, home and personal care tags, etc.
It is not recommended for labeling to irregular surfaces or often extruded bottles.

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of RoHS, REACH, VOC

Minimum labeling temp: 0℃

Service temp: -20℃~80℃ (24h after labeling)

Suitable for aviation or railway baggage tags, high quality logistics tags, home and personal care tags, etc.

It is not recommended for labeling to irregular surfaces or often extruded bottles.

Impresión y procesamiento

Specially treated coating surface ensures excellent printability and barcode printing performance, good stiffness, convenient for labeling. Suitable for multiple printing methods, including ribbon printing, screen and offset printing, etc. Suitable for UV ink, oil-type inks, and water-based ink.
Alcohol or volatile organic solvent inks are not applicable.
It should be avoided to print to the edge of the label, especially with screen UV inks and UV varnish, high contractility will cause the label to curl, resulting in detachment from the liner or warping on the affixed object. It is recommended to conduct ink tests before printing.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock

High quality synthetic paper with printability similar to paper and physical characteristics similar to BOPP film

Indicador

Substance

Caliper

Parámetro

57±5%

75±5%

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Adhesive

High-viscosity permanent emulsion acrylic adhesive
This adhesive complies with FDA section 21 (175.105) a n can b e use d fo r non-contac t labelin g o f food, pharmaceutical an d cosmeti c products.

Indicador

Initial Tack

90°Peel Adhesion (20min)

Shear

Parámetro

≥8

≥5

≥15

Unidad

N/25mm

Método

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Super calendered white glassine

Indicador

Substance

Caliper

Parámetro

80±5%

67±5%

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Facestock: High quality synthetic paper with printability similar to paper and physical characteristics similar to BOPP film
Indicador	Parámetro	Unidad	Método
Substance	57±5%	g/㎡	ISO 536
Caliper	75±5%	μm	ISO 534

Adhesive: High-viscosity permanent emulsion acrylic adhesive This adhesive complies with FDA section 21 (175.105) a n can b e use d fo r non-contac t labelin g o f food, pharmaceutical an d cosmeti c products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥8	N	FTM9,ss
90°Peel Adhesion (20min)	≥5	N/25mm	FTM2,ss
Shear	≥15	H	FTM8,ss

Liner: Super calendered white glassine
Indicador	Parámetro	Unidad	Método
Substance	80±5%	g/㎡	ISO 536
Caliper	67±5%	μm	ISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.