HS1047 UV Inkjet Synthetic 80/Acrylic A-08B/BG65

Código:

HS1047

Descargar

UV Inkjet Synthetic 80/Acrylic A-08B/BG65

Uso:

Minimum labeling temp: -10℃
Service temp: -30℃~70℃ (24h after labeling)
Suitable for the dry cold storage cold chain field.
Due to the stiffer facestock, this material is not recommended for bottles with small diameter or labeling to irregular surfaces or often extruded bottles.
Good initial and final adhesion at low temperatures, with excellent performance on many packaging materials.

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of RoHS, REACH,VOC

Minimum labeling temp: -10℃

Service temp: -30℃~70℃ (24h after labeling)

Suitable for the dry cold storage cold chain field.

Due to the stiffer facestock, this material is not recommended for bottles with small diameter or labeling to irregular surfaces or often extruded bottles.

Good initial and final adhesion at low temperatures, with excellent performance on many packaging materials.

Impresión y procesamiento

Suitable for conventional printing.It should be avoided to print to the edge of the label, high contractility will cause the label to curl, resulting in detachment from the liner or warping on the affixed object. It is recommended to conduct ink tests before printing.
It can be used in digital UV inkjet printing processes.
Special die-cut knife for film is recommended.
Not recommended to process and use in environment above 20 ℃ to prevent adhesive squeeze-out.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%.
Prolonge storage outside these condition migh reduce the shelf life.

Facestock

A kind of high-quality synthetic paper with both printability similar to paper and physical characteristics similar to BOPP film.

Indicador

Caliper

Parámetro

80±5%

Unidad

μm

Método

ISO 534

Adhesive

A kind of acrylic adhesive with good low-temperature performance
This adhesive complies with FDA section 21 (175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.

Indicador

Initial Tack

90°Peel Adhesion (20min)

Shear

Low-temperature Loop Tack

Parámetro

≥8

≥5

≥1

≥13

Unidad

N/25mm

hours

Método

FTM9，ss

FTM2，ss

FTM8，ss

±5℃，ss

Liner

Super calendered blue glassine Ⅲ

Indicador

Substance

Caliper

Parámetro

65±5%

57±5%

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Facestock: A kind of high-quality synthetic paper with both printability similar to paper and physical characteristics similar to BOPP film.
Indicador	Parámetro	Unidad	Método
Caliper	80±5%	μm	ISO 534

Adhesive: A kind of acrylic adhesive with good low-temperature performance This adhesive complies with FDA section 21 (175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥8	N	FTM9，ss
90°Peel Adhesion (20min)	≥5	N/25mm	FTM2，ss
Shear	≥1	hours	FTM8，ss
Low-temperature Loop Tack	≥13	N	±5℃，ss

Liner: Super calendered blue glassine Ⅲ
Indicador	Parámetro	Unidad	Método
Substance	65±5%	g/㎡	ISO 536
Caliper	57±5%	μm	ISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.