Código:

HEC523

Descargar

PE Clear 80/Acrylic C-01/WG60

Uso:

Minimum labeling temp: 0℃
Service temp: -20℃~80℃ (24h after labeling)
Suitable for application of daily chemical, personal care and washing products, etc.
Suitable for labels of cosmetics, daily chemical products and washing products with certain extrusion resistance requirements.

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of RoHS, REACH, VOC

Minimum labeling temp: 0℃

Service temp: -20℃~80℃ (24h after labeling)

Suitable for application of daily chemical, personal care and washing products, etc.

Suitable for labels of cosmetics, daily chemical products and washing products with certain extrusion resistance requirements.

Impresión y procesamiento

With special treatment coated, can be used in letterpress, flexo, gravure and screen printing. Suitable for UV ink.
Control the viscosity of ink, high-contractility of ink bring label crimp, causing the label detach from release paper or warp from label object.
In order to ensure the best ink wetting and firmness during the printing process, it is recommended to use online corona treatment and use PE special ink. It is recommended to conduct an ink test before printing.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.
To ensure the PE film printing performance, need to be sealed and stored and used as soon as possible. If it has not been used for a long time, it is necessary to test whether its dyne value meets the usage requirements before use, or use it after online corona treated.

Facestock

This facestock being corona treated, with excellent softness and tensile properties.

Indicador

Substance

Caliper

Parámetro

74±5%

80±5%

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Adhesive

Acrylic emulsion adhesive for PE
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.

Indicador

Initial Tack

90°Peel Adhesion(20min)

Shear

Parámetro

≥8

≥5

≥15

Unidad

N/25mm

hours

Método

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Super calendered white glassine

Indicador

Substance

Caliper

Parámetro

58±5%

51±5%

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Facestock: This facestock being corona treated, with excellent softness and tensile properties.
Indicador	Parámetro	Unidad	Método
Substance	74±5%	g/㎡	ISO 536
Caliper	80±5%	μm	ISO 534

Adhesive: Acrylic emulsion adhesive for PE This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥8	N	FTM9,ss
90°Peel Adhesion(20min)	≥5	N/25mm	FTM2,ss
Shear	≥15	hours	FTM8,ss

Liner: Super calendered white glassine
Indicador	Parámetro	Unidad	Método
Substance	58±5%	g/㎡	ISO 536
Caliper	51±5%	μm	ISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.