Laser Marking BOPP White 60/Acrylic C-01/PET30

Aplicación

Fulfill the requirement of RoHS, REACH, VOC

Minimum labeling temp: 0℃

Service temp: -20℃~ 80℃ (24h after labeling)

Suitable for application of daily chemical label & food label.

Facestock has special soft pearly gloss, and excellent process performance.

Must test to confirm if used in small bottle label (diameter smaller than 30mm).

Not recommended for bottles with irregular surfaces or bottles that are frequently squeezed.

Impresión y procesamiento

With special treatment coating, can be used in letterpress printing, flexo printing, gravure printing, screen printing and varieties of printing methods. Suitable for UV ink and water-based ink.
Suitable for thermal transfer (ribbon) printing and laser printing.
Control the viscosity of print ink, high contractility bring label crimp, causing the label detach from release paper or warp from label object.
Sharp special die-cutting knife for film is recommended, especially the flat die-cutting.
PET liner is well suited for high-speed die cutting and labeling.
Pay attention to static electricity elimination during production to avoid its impact on product quality.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.