Código:

HPS572

Descargar

BOPP Silver 50/Acrylic C-01/WG80

Uso:

Minimum labeling temp: 0℃
Service temp: -20℃~80℃ (24h after labeling)
Suitable for daily chemical products label, personal hygiene products label and promotional label.
Not recommended to be used in irregular curved surface and extra soft bottle because the facestock is stiffer.
Not recommended for occasions with duplicate paste requirement.

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of RoHS, REACH, VOC

Minimum labeling temp: 0℃

Service temp: -20℃~80℃ (24h after labeling)

Suitable for daily chemical products label, personal hygiene products label and promotional label.

Not recommended to be used in irregular curved surface and extra soft bottle because the facestock is stiffer.

Not recommended for occasions with duplicate paste requirement.

Impresión y procesamiento

With special treatment coating, can be used in letterpress printing, flexo printing, gravure printing, screen printing and varieties of printing methods. Suitable for UV ink and water-based ink.
Control the viscosity of print ink. High contractility brings label crimp, causing the label detach from release paper or warp from label object.
Excellent performance at bronzing.
It is recommended to use a sharp film-specific die-cutting knife, especially for flat pressing die-cutting.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock

A kind of high metal gloss BOPP film with special printability coating.

Indicador

Substance

Caliper

Parámetro

45±3

50±5

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Adhesive

General purpose film acrylic adhesive
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.

Indicador

Initial Tack

90°Peel Adhesion （20min）

Shear

Parámetro

≥8

≥5

≥15

Unidad

N/25mm

hours

Método

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Super calendered thick white glassine

Indicador

Substance

Caliper

MD Tensile Strength

Parámetro

80±5%

70±5%

≥6

Unidad

g/㎡

μm

N/m

Método

ISO 536

ISO 534

ISO 1924-2

Facestock: A kind of high metal gloss BOPP film with special printability coating.
Indicador	Parámetro	Unidad	Método
Substance	45±3	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Adhesive: General purpose film acrylic adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥8	N	FTM9,ss
90°Peel Adhesion （20min）	≥5	N/25mm	FTM2,ss
Shear	≥15	hours	FTM8,ss

Liner: Super calendered thick white glassine
Indicador	Parámetro	Unidad	Método
Substance	80±5%	g/㎡	ISO 536
Caliper	70±5%	μm	ISO 534
MD Tensile Strength	≥6	N/m	ISO 1924-2

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.