HPC3009 BOPP Clear 40/Acrylic C-02/PET23

Código:

HPC3009

Descargar

BOPP Clear 40/Acrylic C-02/PET23

Uso:

Minimum labeling temp: 0℃
Service temp: -20℃~80℃ (24h after labeling)
Suitable for daily chemical, personal care, medicine and other fields；such as bottle label, sealing label etc.
Due to the stiffer facestock, this material is not recommended for bottles with diameter less than 20mm or labeling to irregular curved surfaces or very soft bottle.
Not recommended for applications with repeated stick requirements.
Suitable for "no-label look" transparent label.
If need to be applied to wet surface, it must be tested to ensure that it is resistant to being soaked.

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of RoHS, REACH，VOC

Minimum labeling temp: 0℃

Service temp: -20℃~80℃ (24h after labeling)

Suitable for daily chemical, personal care, medicine and other fields；such as bottle label, sealing label etc.

Due to the stiffer facestock, this material is not recommended for bottles with diameter less than 20mm or labeling to irregular curved surfaces or very soft bottle.

Not recommended for applications with repeated stick requirements.

Suitable for "no-label look" transparent label.

If need to be applied to wet surface, it must be tested to ensure that it is resistant to being soaked.

Impresión y procesamiento

With special treatment coated, can be used in multiple printing methods such as letterpress, flexo, gravure, and screen printing etc. Suitable for UV and water-based inks.
Control the viscosity of print ink, high-contractility bring label crimp, causing the label detach from release paper or warp from label object.
Film special die-cutting knife is recommended, especially the flat die-cutting.
PET substrate is highly suitable for high-speed die-cutting and labeling.
Pay attention to static electricity elimination during production to avoid its impact on product quality.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock

A kind of transparent bi-axially stretch pp film with coated, have good performance in waterproof, oil resistance, and chemical resistance.

Indicador

Substance

Caliper

Parámetro

35±5

40±5

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Adhesive

General purpose membrane emulsion acrylic adhesive
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.

Indicador

Initial Tack

90°Peel Adhesion（20min）

Shear

Parámetro

≥8

≥5

≥15

Unidad

N/25mm

hours

Método

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Transparent PET

Indicador

Caliper

Parámetro

23±5%

Unidad

μm

Método

ISO 534

Facestock: A kind of transparent bi-axially stretch pp film with coated, have good performance in waterproof, oil resistance, and chemical resistance.
Indicador	Parámetro	Unidad	Método
Substance	35±5	g/㎡	ISO 536
Caliper	40±5	μm	ISO 534

Adhesive: General purpose membrane emulsion acrylic adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥8	N	FTM9,ss
90°Peel Adhesion（20min）	≥5	N/25mm	FTM2,ss
Shear	≥15	hours	FTM8,ss

Liner: Transparent PET
Indicador	Parámetro	Unidad	Método
Caliper	23±5%	μm	ISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.