YA256T Art Paper 150g /Hot melt B-02/BG65

Código:

YA256T

Descargar

Art Paper 150g /Hot melt B-02/BG65

Uso:

Minimum labeling temp: 0℃
Service temp: -20℃~70℃ (24h after labeling)
Suitable for single pages, folding pages, booklets, posters, etc.
It is not recommended to use labels on small bottles with a diameter of less than 30mm.

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of RoHS, REACH

Minimum labeling temp: 0℃

Service temp: -20℃~70℃ (24h after labeling)

Suitable for single pages, folding pages, booklets, posters, etc.

It is not recommended to use labels on small bottles with a diameter of less than 30mm.

Impresión y procesamiento

Suitable for conventional printing.
Control the viscosity of print ink, to avoid heavy viscosity cause coating exfoliation.
The facestock is suitable for high-quality printing and hot stamping. During sampling, pay attention to whether its release properties are adequate for the application.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock

Thick art paper, glossiness between matte & high gloss.

Indicador

Substance

Caliper

Parámetro

148±5

140±5%

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Adhesive

General purpose permanent hot melt adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.

Indicador

Initial Tack

90°Peel Adhesion (20min)

Shear

Parámetro

≥17 or PT

≥8 or PT

≥10

Unidad

N/25mm

Método

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Super calendered blue glassine Ⅲ

Indicador

Substance

Caliper

Parámetro

65±5%

57±5%

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Facestock: Thick art paper, glossiness between matte & high gloss.
Indicador	Parámetro	Unidad	Método
Substance	148±5	g/㎡	ISO 536
Caliper	140±5%	μm	ISO 534

Adhesive: General purpose permanent hot melt adhesive This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥17 or PT	N	FTM9,ss
90°Peel Adhesion (20min)	≥8 or PT	N/25mm	FTM2,ss
Shear	≥10	H	FTM8,ss

Liner: Super calendered blue glassine Ⅲ
Indicador	Parámetro	Unidad	Método
Substance	65±5%	g/㎡	ISO 536
Caliper	57±5%	μm	ISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.