YA215 Art Paper 80g /Hot melt B-02/CCK80

Código:

YA215

Descargar

Art Paper 80g /Hot melt B-02/CCK80

Uso:

Minimum labeling temp: 0℃
Service temp: -20℃~70℃ (24h after labeling)
Suitable for food, sheet labels, inserts, and other applications on conventional gloss surfaces.
Must test to confirm if used on small bottle labels (diameter smaller than 30mm).
Rough surface substrates are not recommended.

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of RoHS, REACH

Minimum labeling temp: 0℃

Service temp: -20℃~70℃ (24h after labeling)

Suitable for food, sheet labels, inserts, and other applications on conventional gloss surfaces.

Must test to confirm if used on small bottle labels (diameter smaller than 30mm).

Rough surface substrates are not recommended.

Impresión y procesamiento

Suitable for conventional printing.
The facestock can be beautifully printed and colors of patterns are rich.
For fine barcode printing, comprehensive print test is required.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock

Art paper, glossiness between matte & high gloss.

Indicador

Substance

Caliper

Parámetro

80±5%

70±5%

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Adhesive

General purpose permanent hot melt adhesives
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.

Indicador

Initial Tack

90°Peel Adhesion （20min）

Shear

Parámetro

≥17 or PT

≥9 or PT

≥10

Unidad

N/25mm

hours

Método

FTM9,ss

FTM2,ss

FTM8,ss

Liner

White CCK

Indicador

Substance

Caliper

MD Tensile Strength

Parámetro

80±10%

≥5.0

Unidad

g/㎡

μm

kN/m

Método

ISO 536

ISO 534

ISO 1924-2

Facestock: Art paper, glossiness between matte & high gloss.
Indicador	Parámetro	Unidad	Método
Substance	80±5%	g/㎡	ISO 536
Caliper	70±5%	μm	ISO 534

Adhesive: General purpose permanent hot melt adhesives This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥17 or PT	N	FTM9,ss
90°Peel Adhesion （20min）	≥9 or PT	N/25mm	FTM2,ss
Shear	≥10	hours	FTM8,ss

Liner: White CCK
Indicador	Parámetro	Unidad	Método
Substance	80±10%	g/㎡	ISO 536
Caliper	80±10%	μm	ISO 534
MD Tensile Strength	≥5.0	kN/m	ISO 1924-2

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.