Código:

YA010

Descargar

Art Paper 80g /Acrylic A-01/WG50

Uso:

Minimum labeling temp：+5℃
Service temp：-20℃~80℃ (24h after labeling)
Suitable for food label and medicine label in conventional gloss.
Must test to confirm if used in small bottle label.(diameter smaller than 30mm).
Rough surface substrates are not recommended.

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of ROHS, REACH, VOC

Minimum labeling temp：+5℃

Service temp：-20℃~80℃ (24h after labeling)

Suitable for food label and medicine label in conventional gloss.

Must test to confirm if used in small bottle label.(diameter smaller than 30mm).

Rough surface substrates are not recommended.

Impresión y procesamiento

Suitable for conventional printing.
Control the viscosity of the ink to avoid coating detachment caused by excessively sticky ink.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃& relative humidity 50±5%
Prolonged storage outside these conditions might reduce the shelf life.

Facestock

Art paper, glossiness between matte & high gloss

Indicador

Substance

Caliper

Parámetro

80±5%

70±5%

Unidad

g/m²

μm

Método

ISO 536

ISO 534

Adhesive

High-viscosity permanent emulsion acrylic adhesive
This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products.

Indicador

Initial Tack

90°Peel Adhesion(20min)

Shear Strength

Parámetro

≥14 or PT

≥7 or PT

≥3

Unidad

N/25mm

hours

Método

FTM9, ss

FTM2, ss

FTM8, ss

Liner

Super calendered white glassine

Indicador

Substance

Caliper

Parámetro

50±5%

43±5%

Unidad

g/m²

μm

Método

ISO 536

ISO 534

Facestock: Art paper, glossiness between matte & high gloss
Indicador	Parámetro	Unidad	Método
Substance	80±5%	g/m²	ISO 536
Caliper	70±5%	μm	ISO 534

Adhesive: High-viscosity permanent emulsion acrylic adhesive This adhesive complies with FDA section 21 (175.105) and can be used for not-contact labeling of food, pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥14 or PT	N	FTM9, ss
90°Peel Adhesion(20min)	≥7 or PT	N/25mm	FTM2, ss
Shear Strength	≥3	hours	FTM8, ss

Liner: Super calendered white glassine
Indicador	Parámetro	Unidad	Método
Substance	50±5%	g/m²	ISO 536
Caliper	43±5%	μm	ISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.