YA204FC Art Paper 80g FSC/Hot melt B-02/WG60 FSC

Código:

YA204FC

Descargar

Art Paper 80g FSC/Hot melt B-02/WG60 FSC

Uso:

Minimum labeling temp: 0℃
Service temp: -20℃~70℃ (24h after labeling)
Suitable for food labels or medicine labels in conventional gloss.
Must test to confirm if used in small bottle label (diameter smaller than 30mm).

Contáctenos ahora

Fabricado por Youhua. Vendido en EE. UU. por Adwins International.

Detalle

Aplicación

Fulfill the requirement of RoHS, REACH, FSC

Minimum labeling temp: 0℃

Service temp: -20℃~70℃ (24h after labeling)

Suitable for food labels or medicine labels in conventional gloss.

Must test to confirm if used in small bottle label (diameter smaller than 30mm).

Impresión y procesamiento

Suitable for conventional printing.
The facestock can be beautifully printed and colors of patterns are rich.
There are many types of digital printing and inks, must to check the printing quality first.

Plazo y condiciones de almacenamiento

From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.

Facestock

FSC Art paper, glossiness between matte & high gloss.

Indicador

Substance

Caliper

Parámetro

80±5%

68±5

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Adhesive

General purpose permanent hot melt adhesives
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.

Indicador

Initial Tack

90°Peel Adhesion （20min）

Shear

Parámetro

≥17 or PT

≥9 or PT

≥10

Unidad

N/25mm

hours

Método

FTM9,ss

FTM2,ss

FTM8,ss

Liner

Super calendered FSC white glassine

Indicador

Substance

Caliper

Parámetro

56±5%

50±5

Unidad

g/㎡

μm

Método

ISO 536

ISO 534

Facestock: FSC Art paper, glossiness between matte & high gloss.
Indicador	Parámetro	Unidad	Método
Substance	80±5%	g/㎡	ISO 536
Caliper	68±5	μm	ISO 534

Adhesive: General purpose permanent hot melt adhesives This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food, pharmaceutical and cosmetic products.
Indicador	Parámetro	Unidad	Método
Initial Tack	≥17 or PT	N	FTM9,ss
90°Peel Adhesion （20min）	≥9 or PT	N/25mm	FTM2,ss
Shear	≥10	hours	FTM8,ss

Liner: Super calendered FSC white glassine
Indicador	Parámetro	Unidad	Método
Substance	56±5%	g/㎡	ISO 536
Caliper	50±5	μm	ISO 534

Declaración

Todas las declaraciones, la información técnica y las recomendaciones se basan en pruebas que se consideran confiables, pero no constituyen una garantía. El cliente debe probar todos los productos vendidos en el entorno de uso final para confirmar que cumplen con los requisitos de dicho entorno y para determinar qué materiales comprar. Nos reservamos el derecho de interpretación final.